| Fuel Cell Power Systems (ANSI/CSA
America
FC1-2004) |
This standard applies to stationary fuel cell power
systems that are packaged, self-contained or factory matched packages of
integrated systems, which through electrochemical reactions and other
processes, generate alternating-current or direct-current electricity. |
| Gas and Vapor Detectors and Sensors (UL 2075) |
This standard covers
requirements for toxic and combustible gas and vapor detectors and sensors
intended to be portable or employed in indoor or outdoor locations in
accordance with the National Electrical Code, NFPA 70. A gas detector and/or sensor and/or vapor detector,
as covered by these requirements, consists of an assembly of electrical
components coupled with a sensing means inside a chamber, or by separate
components to detect toxic and/or combustible gases or vapors. |
| Inverters, Converters and Controllers for Use in
Independent Power Systems (UL 1741) |
This standard covers requirements for inverters, converters, charge
controllers, and interconnection system equipment (ISE) intended for use in
stand-alone (not grid-connected) or utility-interactive (grid-connected)
power systems. Utility-interactive inverters, converters, and ISE are
intended to be operated in parallel with an electric power system (EPS) to
supply power to common loads. |
| Interfacing - Electrical |
|
| National Electric Code – Fuel Cell Systems (NFPA 70
Article 692) |
This Code covers the installation
of electrical conductors, equipment, and raceways; signaling and
communications conductors, equipment, and raceways; and optical fiber cables
and raceways for public and private premises, including buildings, structures, mobile homes,
recreational vehicles, and floating buildings, etc. Article 692 covers electrical safety requirements for fuel cells. |
| Interconnecting Distributed resources with Electric Power
Systems (IEEE 1547) |
This standard establishes
criteria and requirements for interconnection of distributed resources (DR)
with electric power systems (EPS). This document provides a uniform standard for interconnection of
distributed resources with electric power systems. |
